BTYWJ - PRISMA OPAQUERS MATERIAL
- MSDS: BTYWJ
- Manufacturer: CAULK DENTSPLY
- Product Name: PRISMA OPAQUERS MATERIAL
- National Stock Number: 6520-00N048748
Product Identification
Product ID:PRISMA OPAQUERS MATERIAL
MSDS Date:06/18/1992
FSC:6520
NIIN:00N048748
MSDS Number: BTYWJ
Responsible Party
MILFORD, DE 19963-0359
US
Emergency Phone: 302-422-4511
Info Phone: 302-422-4511
Cage: 11107
Contractor
Telephone: 302-422-4511/ 703-451-1900
Cage: 11107
Ingredients
NONHAZARDOUS INGREDIENTS
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PERSONS SUSCEPTIBLE TO METHACRYLATE,
ACRYLATED & URETHANES MAY DEVELOP ALLERGIC RESPONSES.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:DERMAL REDNESS OR IRRITATION, SEVERE ALLERGIC
RESPONSE MAY RESULT IN BREATHING DIFFICULTIES.
Medical Cond Aggravated by Exposure:ALLERGIES TO METHACRYLATE,
ACRYLATES & URETHANES.
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF
RESP) . INGEST:CONTACT MD. SKIN:WASH W/SOAP & WATER. EYE:FLUSH
W/WATER FOR AT LEAST 15 MINUTES & CONSULT MD.
Fire Fighting
Extinguishing Media:SAND, FOAM, CO*2, DRY CHEMICALS.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:DURING FIRE, IRRITATING GASSES MAY BE
PRESENT.
Accidental Release
Spill Release Procedures:SCOOP UP BULK MATERIAL & PLACE IN LABELED
PLASTIC OR METAL CONTAINER. AVOID GROSS SKIN CONTACT TO MINIMIZE
THE POSSIBILITY OF DERMATITIS TO SENSITIVE INDIVIDUALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID STORAGE CONDITIONS >50C.
Other Precautions:MATERIAL IS SENSITIVE TO VISIBLE LIGHT. STORE AWAY
FROM FOOD & BEVERAGES.
Exposure Controls
Respiratory Protection:NONE REQUIRED DURING NORMAL USE OF THIS PRODUCT.
NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN
.
Ventilation:NONE REQUIRED DURING NORMAL USE OF THIS PRODUCT.
Protective Gloves:LATEX OR VINYL GLOVES.
Eye Protection:ANSI APPROVED SAFETY GLASSES.
Other Protective Equipment:NOT REQUIRED FOR GENERAL HANDLING.
Work Hygienic Practices:OBSERVE NORMAL CARE FOR WORKING W/CHEMICALS.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Spec Gravity:1.2
Solubility in Water:INSOLUBLE
Appearance and Odor:CREAMY PASTE, SHADES WHITE TO LIGHT YELLOW
W/ACRYLATE ESTER ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:VISIBLE LIGHT ON PASTE. PROLONGED HEAT
>50C.
Hazardous Decomposition Products:POSSIBLE METHACRYLATE.
Disposal
Waste Disposal Methods:DISPOSE OF I/A/W FEDERAL, STATE & LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.